06 / Made without limits
ANY PART
- PROCESSES
- FDM / SLS / LFAM / SLA
- FILE TYPES
- STL / STEP / 3MF / OBJ
Print Your World.
Printerior is a 3D printing manufacturer that takes your part from first sketch to full production. We design it, make the material and print it, at any size and any volume.
24 hr response
Aerospace—Lattice quadcopter drone
10 million+ parts printed for thousands of trusting clients
Global manufacturing partners
07 / From intricate to immense
ANY SIZE
- MIN WALL
- 0.4 MM DETAILS
- MAXIMUM
- 12.2 × 2.7 × 2.7 M
08 / One or tens of thousands
ANY QUANTITY
- ONE-OFF
- 1 UNIT
- PRODUCTION RUN
- 144,000 PARTS IN 4 DAYS
INSIDE THE PRINT ROOM
A factory that runs
around the clock.
0+
Printers running IN PARALLEL
Automated. 24/7 production at any volume without retooling or setup.
0+
PARTS SHIPPED PER DAY
1
0+
UNITS PER RUN
5mm
0 mm
BUILD SIZE RANGE ACROSS TECHNOLOGIES
0%
RECYCLED MATERIAL, IN-HOUSE
Services
Five key services under one roof.
Printerior controls everything from material production to manufacturing finished end-consumer products.
01Production
Mass Production
End-use parts, at volume. Printed, finished, inspected, and shipped from a single facility built for repeatability. From prototype validation to recurring runs, our production floor holds tolerance batch after batch.
02LFAM
Large Format (LFAM)
Parts up to 40 ft long, printed for you. Send us the file and we print it in a single build on our LFAM cells, from furniture, to molds and tooling, marine parts, architectural panels, and industrial work, all made from in-house pellet feedstock.
03Design
Design Services
Engineered for additive. 3D scanning and reverse engineering, CAD built from your sketch or rough file, DFAM optimization, file repair and lightweighting, all reviewed by the team that prints your part.
04Materials
Material Production
Bespoke filaments and pellets engineered to your mechanical, thermal, regulatory, and sustainability targets, from recycled feedstocks to reinforced composites for end-use parts.
05Inventory
Digital Inventory
Store parts as files. Reorder on demand from a live catalog that ships only what you need. Skip warehouses, dead stock, and long-tail SKUs. Every part stays production-ready as a saved, approved file.
Systems and material
Bring the power in-house
Put large-format printing on your own floor. We sell LFAM systems, and also make pellets and filament to feed your FDM and LFAM systems.
All customer service from the same team producing your parts.
PRINTING TECHNOLOGIES
Four printing
technologies.
Four technologies under one roof, each built for a different kind of part, so your idea gets the process it deserves.
We print the whole spectrum.
Our multi-technology facility lets us make almost any part, at any size, strength, finish, and quantity.
Size
ScalePin-sized
Strength
DurabilityRubber-flexible
Finish
SurfaceGlass-smooth
Quantity
VolumeOne
Need help choosing a printing service?
From file to part
Digital manufacturing,
on demand.
UPLOAD FILEFINISHED PART
- 01Upload your CAD
- 02Print on demand
- 03Delivered
File to finished part, delivered in as little as 48 hours.
1-click reorder.
Every part you print stays on file, ready to run again in a single click at the same spec.
NO RE-QUOTINGNO RETOOLINGSHIPS IN 48H
Reorder
SYNCED_PROD_V2
THE PRINTERIOR ADVANTAGE
What the workflow buys you.
01
No tooling or molds
Skip molds, jigs, and setup. Print from CAD with production-grade repeatability across every batch.
02
Faster lead times
Parts in days, not weeks. 100% automated robotic systems run 24/7, and print only what you need, when you need it.
03
Design freedom
Complex geometry at no added cost. Iterate as much as you want; a change is as simple as editing your CAD file.
04
Flexible scaling
One part or a million, with no minimums. And order parts on-demand.
Products
Print with us, or
print it yourself.
We print large-format parts every day, so we know what it takes. We sell the systems we trust and the materials we make for them.
Apollo robotic cellLFAM SYSTEMS · FROM PRINTERIOR
Own the full system.
Robot, extruder, controls and install, all bought from us. We train your team and keep it running.
Filament · FDMUp to 100% recycled
Pellets · LFAMUp to 100% recycled
MATERIALS · FDM + LFAM
Fuel every printer.
Filament for FDM and pellets for LFAM, made in-house for any machine you run.
Made in-houseSustainableCustom colorCustom strengthHeat + UV gradesFlame retardant
FilamentFor FDM printersShop Filament
PelletsFor LFAM systemsShop Pellets
Custom
blendsTo your spec, or from your own waste streamCustom material
blendsTo your spec, or from your own waste streamCustom material
MATERIALS
We make the material your parts need.
This is the material that goes into every part we print. We compound it in-house, from recycled plastic, and qualify it on our own production floor so every batch prints the same.
Formulated to your spec
Request a custom formulation →
Need help choosing a material?
SUSTAINABILITY
Sustainability at Scale.
We produce 100% recycled feedstock in-house, and print only what's ordered; no overstock, no obsolescence. We then take parts back at the end of its life to regrind, re-pellet, and print again. So every part has another life.
RECYCLED FEEDSTOCK
0%
RECYCLABLE
0%
OVERPRODUCTION
0%
WAREHOUSE & INVENTORY WASTE
0%
01
Reclaimed plastic
Plastic waste we source and sort.